ID Boring

ID Boring

Insert LBM
Holder LBMA DS-LBMB CH-LBM
LBMA DS-LBMB CH-LBM
Min. Bore Dia. Ø.039" (1.0mm)

ID Boring

Insert SHFS・SHFB・SBFS・SBFB
Holder HY-NBH-OH HY-NBH NBH
HY-NBH-OH HY-NBH NBH
STICK DUO HYPER
with Coolant through
STICK DUO HYPER  
Min. Bore Dia. Ø.079" (2.0mm)
  Holder HY-NBH-OH HY-NBH NBH
Insert STICK DUO HYPER with
Coolant through
STICK DUO HYPER STICK DUO
"S" chip breaker"S" chip breakerSharp cutting edge SHFS-S
High Precision Insert
Best fit Best fit 2nd OPT.
SBFS-S 2nd OPT. 2nd OPT. Best fit
"F" chip breaker"F" chip breakerEvacuates chips BACKWARD SHFB-F
High Precision Insert
Best fit Best fit 2nd OPT.
SBFB-F 2nd OPT. 2nd OPT. Best fit
"H" Flat type"H" Flat typeMirror finish edge SHFS-H
High Precision Insert
Best fit Best fit 2nd OPT.
SBFS-H 2nd OPT. 2nd OPT. Best fit
Back turning SBB 2nd OPT. 2nd OPT. Best fit
Grooving SBG 2nd OPT. 2nd OPT. Best fit
Threading SBT 2nd OPT. 2nd OPT. Best fit

ID Boring

Insert MBL ERGP
Holder C-MBR
(Carbide shank)
S-MBR
(Steel shank)
C-SEXR
(Carbide shank)
S-SEXR
(Steel shank)
C-MBR (Carbide shank) S-MBR (Steel shank) C-SEXR (Carbide shank) S-SEXR (Steel shank)
Coolant through Coolant through Coolant through Coolant through
Min. Bore Dia. Ø.197" (5.0mm) Ø.236" (6.0mm)

ID Boring

Insert CC/CP TC/TP
Holder C-SCLC/P
(Carbide shank)
S-SCLC/P
(Steel shank)
C-STUC/P
(Carbide shank)
S-STUC/P
(Steel shank)
C-SCLC/P (Carbide shank) S-SCLC/P (Steel shank) C-STUC/P (Carbide shank) S-STUC/P (Steel shank)
Coolant through Coolant through Coolant through Coolant through
Min. Bore Dia. Ø.276" (7.0mm) Ø.315" (8.0mm)
ID Back Turning

ID Back Turning

Insert SBB TC/TP
Holder HY-NBH-OH NBH C-STZP/C
(Carbide shank)
HY-NBH-OH NBH C-STZP/C (Carbide shank)
Coolant through    
Min. Bore Dia. Ø.118" (3.0mm) Ø.394" (10mm)
ID Grooving

ID Grooving

Insert SBG SFG GTG
Holder HY-NBH-OH NBH NBH S-BGR/BGR
HY-NBH-OH NBH NBH S-BGR/BGR
Coolant through      
Min. Bore Dia. Ø.118" (3.0mm) Ø.118" (3.0mm) Ø.394" (10mm)
ID Threading

ID Threading

Insert SBT TMN
Holder HY-NBH-OH NBH TGC/HN
HY-NBH-OH NBH TGC/HN
Coolant through    
Min. Bore Dia. Ø.118" (3.0mm) Ø.315" (8.0mm)