BIDEMICS JP0
Industry changing - Super high speed finishing of HRSA materials.

Up to 15 times faster speeds vs. carbide and CBN

Introduction Movie

Introduction Movie

Key Points

  • Wear resistance provides performance and consistency of machined part straightness
  • Offers finishing speeds of 500 m/min

Application Area

Continuous cuts when finishing HRSA materials

Cutting Speed and Wear Resistance Comparison

Cutting Speed and Wear Resistance Comparison

Recommended Cutting Conditions

Grade Material Application Process Cutting speed(m/min) Feed(mm/rev) DOC(mm) With coolant
JP0 Heat Resistant Super Alloys Turning Finishing 180 - 5000.05- 0.200.1- 0.7

Wear Resistance

Wear Resistance

Part's Straightness Performance

Part's Straightness Performance

Recommended Machining Passes at a Corner

Recommended Machining Passes at a Corner

Insert Item List

Geometry EDP Item number Corner R Grade Dimensions(mm)
JP0 IC Thickness Edge preparation
cnga 5106604 CNGA 120404 BQENB 0.4 12.7 4.76 Honed edge
0.04
5106620 120408 BQENB 0.8
5106612 120412 BQENB 1.2
dnga 5106646 DNGA 150404 BQENB 0.4
5106653 150408 BQENB 0.8
5106661 150412 BQENB 1.2
vnga 5106679 VNGA 160404 BQENB 0.4 9.525
5106687 160408 BQENB 0.8